Página 5
Introduce the cable thru the cablegland Cable diameter from 5 to 13 mm (2,3,4 or 5 poles cross-section 1.5 to 2.5mm CI Connect following the marks (3 or 5 poles) Extract the connector CII Connect following the marks (2 or 4 poles)
Página 6
Standard With Control Line With Dali Line (Main) Line (Main) Line (Main) Line (Main) Line (Main) Line (Main) Earth Earth Earth Neutral (Main) Neutral (Main) Neutral (Main) Neutral (Main) Neutral (Main) Neutral (Main) Dali Dali Dali Dali Introduce the connector Close the box (2.5 Nm) Screw both sides (2.5 Nm)
Página 9
Tolerances: Temperature protection: All electrical and flux values are typical Both LED and Driver have a temperature protection. values at 25ºC ambient. When for any reason the temperature of LED is too high the system first dims back to 50%, if it is still too hot it will switch Flux off.
Página 10
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address http://www.philips.com/lighting Philips Lighting B.V Por la presente, declara que el tipo de equipo radioeléctrico es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: http://www.philips.com/lighting...
Página 12
The information presented in this document is not intended as any commer- cial offer and does not form part of any quotation or contract. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V..