Emergency Call; Low Battery Indicator; Exit Delay - Zodiac Security ZS-10A Manual De Instrucciones

Emergency call

With SOS button unlocked
1. Press Arm [ ] or Home Mode [ ] key on the
keypad to unlock it.
2. Press [SOS].
3. The LED indicator blinks once, the keypad
beeps once, and the alarm is triggered
immediately.
With SOS button locked
1. Press Arm [ ] or Home Mode [ ] key on the keypad to unlock it.
2. Type your user code or admin code.
3. Press [SOS] to trigger the alarm immediately.

Low battery indicator

When the battery level is low, the LED indicator blinks 3 times every 5 seconds.
In such case, please change the batteries.
Settings
Enter Setup Mode
Press Arm [ ] or Home Mode [ ] key on the
keypad to unlock it.
Type [admin code + #] to enter Setup mode.
Default Admin code: 123456
Under setup mode, if no operations is made for 30 seconds the keypad will exit
the setup mode automatically. The setup mode can also be exited by pressing [*].

Exit delay

Detectors start detecting potencial intrusions immediately after the system has
been armed. To prevent alarms when you leave your house, an exit delay can
be set up. If you have set up an exit delay, the control panel will receive the
signal to arm the system when you press the Arm [ ] key on the keypad after
the time set.