Power Supply - Trevi SB 8310TV Guia Del Usuario

ENGLISH
INSTALLATION NOTE
When installing the SB 8310TV with TV under 24" in size, you may need to lift up the TV so that the sound bar
doesn't stand between the TV infrared receiver and the remote control signal.

POWER SUPPLY

Connect the DC plug of the supplied AC adapter to the 5V
the supplied power adapter to an electrical outlet.
POWER ON/OFF AND VOLUME ADJUSTMENT
1. Turn the on/off knob (1) clockwise until you hear a click to switch on the appliance.
2. Turn the on/off knob (1) counterclockwise until you hear a click to switch off the appliance.
3. Rotate the knob of volume (2) clockwise/anticlockwise to increase/decrease the volume.
Note:
- Some audio outputs which you connect the Soundbar (like headphone output) can have its own volume
control: make sure you have set on the source device an adequate level audio output otherwise the Soundbar
will sound even at maximum volume.
- If the sound played by the Soundbar be distorted means that the input signal is too strong: lower the
volume of the Soundbar or paid on a level audio source device output more low.
- When connecting to a TV via headphone out, sometimes the sound reproduced from the Soundbar is low
even at maximum volume; in this case connect the Soundbar to the audio output of the TV-scart adapter
(not supplied).
AUX
1. Use a jack cable 3.5mm stereo to connect the AUX input on the rear to the headphones / audio of the TV or other
source device.
2. Switch on the appliance. It will automatically play the AUX input (7).
3. Press the PLAY/PAUSE (5) button to mute the sound temporarily. Press again to restore it.
4. In case you want to switch the AUX input from another source, press and hold the PLAY/PAUSE (5) button until
the voice guide does not indicate LINE IN.
microSD CARD (TF CARD)
1. Insert a micro-SD Card into the micro-SD input (8).
2. Switch on the appliance. Playback will start automatically.
3. In case you want to switch the microSD Card input from another source, press and hold the PLAY/PAUSE (5)
button until the voice guide does not indicate TF PLAYING.
4. Press the PLAY/PAUSE button (5) to stop playback temporarily . Press again to resume.
5. Press the NEXT (6) or PREV (4) button to move to the next or previous track.
6. Press and hold down NEXT (6) or PREV (4) button to flinch or fast forward the track.
socket (9) located at the back of the appliance. Connect
6
SB 8310TV