Conceptronic CM3PVR Guia De Inicio Rapido página 44

ENGLISH
Before Recording
Before you start recording with your unit, you can set the record quality. The unit has 3
preset quality settings, which can be selected with the 'Quality' button (26) on the remote
control.
Note: The unit detects copy protection on the connected source, for example MacroVision
protection on DVD discs. When a connected source is copy-protected, the unit will
prevent recording and shows a warning message when the record button is pressed.
One-Touch-Recording
While watching Live TV or Live A/V through the unit, you can start a record of the current
channel by pressing the 'Record' button (23) on the remote control. The unit starts
recording, until you press the 'Stop' button (22) on the remote control, or until the maximum
record time of 6 hours is reached.
When you press the 'Record' button (23) during a record, the record time will be set to 30
minutes, starting at the time you pressed the 'Record' Button.
The message 'OTR+30' will be shown on your screen.
Press the 'Record' button (23) again to increase the time with another 30 minutes, up to a
maximum of 360 minutes.
The unit keeps recording until the record time is elapsed, or until you press the 'Stop' button
(22) on the remote control.
Note: During recording, you cannot change the current channel.
The recording is stored with a name based upon the record date and time, with the following
name:
"MMDDhhmm.AVI"
Recording
(MM = Month, DD = Day, hh = Hour, mm = Minutes)
44