Sony TSL-S11000 Guía Del Usario página 17

Version Display
Auto Load Selection
When Version is selected in the Menu screen, the following screen appears,
where you can confirm the autoloader model, SCSI ID, firmware version and
serial number.
1
Note the displayed information.
2
Press the EJECT button.
The display returns to the Menu screen.
When Auto Load is selected in the Menu screen, the following screen
appears. From this screen you can select whether a cartridge automatically
loads into the DDS drive when a magazine is placed in the auto loader.
1
Press the SELECT button, if necessary, to move the cursor (z) to the
desired setting.
When ON is selected and a magazine is placed in the autoloader, the first
cartridge automatically loads into the DDS drive after the cartridges have
been checked. When OFF is selected, autoloading does not occur.
You can press the EJECT button to cancel any change to the selection
and return to the Menu screen.
2
Press the ENTER button to accept the selection and return to the Menu
screen.
TSL-11000
SCSI ID # 5
Ver. 0000
S/NLXXXXXXXX
S/NDXXXXXXXX
Version Screen
Auto Load
z OFF
ON
Auto Load Selection Screen
Model Name of this Machine
SCSI ID Number
Firmware Version
Loader Serial Number
Embedded Drive Serial Number
17
Chapter 3 Operation