Proze 4.0 Manual Del Producto página 19

Rear Camera
To set up and activate the Rear camera, using the cable in the box, plug this into the rear
camera and then into the rear camera port on the main front camera.
This will give a number of views, by pressing the UP button you can select between
displays, Front View, Rear View, Split Screen (50:50) and picture in picture.
There are 2 ways to fit the rear camera, this can be fitted inside the rear windscreen or
outside of the car (this may require modification to fit to the outside).
The red wire on the cable is fitted to the positive of the reverse light on your car. (Red to
Red) This enables the reverse camera function on the device.
This will then automatically show the reverse camera when you enter reverse and the
reverse light comes on.
To fit the rear camera please follow the diagram below.
There is 5.5 meters of wiring cable supplied in the box with the dash camera, for you to
connect the rear camera to the front. Any excess cable can be hidden away. DO NOT
CUT THE CABEL TO MAKE IT SHORTER. DOING SO WILL VOID YOUR WARRANTY.
19