Caster Installation For Hingetop Mobile Pedestals - Steelcase TS Storage Nstrucciones De Instalacion

®

Caster Installation for Hingetop Mobile Pedestals

1.
Lay the unit on its back or top.
2.
Remove the caster kit from the drawer. The locking
casters go on the front.
3.
While installing the caster, angle the plate to go over
emboss 1 & 2 and then under the formed lance.
4.
Position the caster plate so emboss 1 & 2 are in the
obround holes in the caster plate.
5.
Install one (1) T20 torx drive pan head screw.
6.
Repeat steps 3 thru 5 for the rest of the casters.
7.
Position outerhead wheel on outerhead;
align holes to wheel.
8.
Install outerhead wheel using two (2)
T20 torx drive pan head screws.
EMBOSS 2
LOCKING
CASTERS
OUTERHEAD
WHEEL
NON-LOCKING CASTERS
EMBOSS 1
FORMED
LANCE
T20 TORX DRIVE PAN HEAD SCREW
Page 7 of 57
P/N 939504734
Doc # 70305 Rev J