CPVan SM01 Manual Del Usuario página 12

1、Choose a mounting location (wall or ceiling) ,using the mounting plate
provided as a template, mark two-hole locations.and drill a 3/16" hole
through drywall.
2、 Insert the provided screw through the mounting plate aligning the ribs on
the screw with the slots on the mounting plate.
3、Tighten the screw/mounting plate to wall or ceiling until mounting plate
is very snug against surface.
4、Rotate the smoke alarm into the mounting plate.
5、After installation is finished, press the test button and test again. Test
method refer to the OPERATION AND TESTING chapter.
Option 2: Convenient Mount – Using the double-sided sticker
1、Choose a mounting location (wall or ceiling)，which is a Flat surface,
- 11 -
Questions? Contact us at E-mail [email protected]