Tabla de contenido
NOTAS SOBRE LA INSTALACIÓN
Descripción general
El mando a distancia se comunica con el emisor mediante señal infrarroja a una distancia maxima
de 10 metros, require 2 pilas AAA (LR03)
'+' Button
Time Button
2hr boost Button
Setting the Time
Once the batteries have been installed the LCD screen will display all symbols for 3 second after
which the date and time need to be set.
1.
Set the day using the + or – button and press the mode button to accept.
2.
Next set the hour using the + or – button and the mode button to accept again.
3.
Set the minutes with the + or – button at which point pressing the mode button will accept
the final change and the remote will go into stand-by mode.
Selecting the Operation Mode
The operation mode can be selected using the mode button; these are the same as those on the
radiator and have the same function unless specified below.
Comfort and Economy Temperature Setting
To set the temperature for both the comfort and economy modes; select the desired mode using the
mode button and set the temperature using the + or – buttons. The economy temperature can never
be set higher than the comfort temperature.
Programme Mode
To set the user programme press the time button and the current day will flash. Accept the day, hour
and minutes using the mode button, after which the user programme can be selected in the same
method as completed on the radiator control end.
Mando a distancia (Opcional)
Fan Button
(not compatible with Richmond DPL)
Mode Button
ON / Stand-by
'-' Button
10
Temperature
IR transmision
Time
Programme
Operating Mode
Day of the week
Tabla de contenido
