Attaching Adapter Plate To Display With Vesa 200 X 100 Or 200 X 200 Mounting Pattern - peerless-AV Touchboards PC930 Serie Instalación Y Ensamblaje

Attaching Adapter Plate to Display with VESA 200 or 200 x 100 Mounting Pattern
Attach tilt bracket (F) onto adapter plate (R) using
5
four M5 x 6 mm screws (S) and #10 washers (T) as
shown.
R
F
T
S
FOR VESA 200 MOUNTING PATTERN USING
M4 SCREWS:
Choose hole pattern as shown below. Attach adapter plate
(R) to back of display using four M4 screws (M or N) as
shown below.
NOTE: If screw (M or N) gets less than three threads of
engagement, attach adapter plate (R) to back of display
using four M4 x 20 mm screws (O) and four spacers (P) as
indicated below.
R
M, N, O
FOR VESA 200 x 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach
5-1
adapter plate (R) to back of display using four
M4 screws (M, N, O) as shown below.
R
M, N, O
• If screws don't get three complete turns in the
display inserts or if screws bottom out and bracket is
still not tightly secured, damage may occur to display
or product may fail.
FOR VESA 200 MOUNTING PATTERN USING
M6 OR M8 SCREWS:
Choose hole pattern as shown below. Attach adapter plate
(R) to back of display using four M6 or M8 screws (U, V,
W) as shown below.
R
U, V, W
9 of 35
ISSUED: 11-29-07 SHEET #: 202-9263-3 04-25-14
WARNING