Troubleshooting - H.Koenig V6 Manual De Uso

Problems
Iron won,t heat
No steam go
out when
pressing
steam switch
after the
desired
temperature
is reached.
" <!> "
blink
quickly,other
fabric indicator
turn off, buzzer
sound a "Bi".Ali
buttons are non-
workin. it will
resume when
re-energized
again.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is
a separation of this waste product into communities, you will need to inform your
local authorities about the places where you can return this product. In fact,
electrical and electronic products contain hazardous substances that have
harmful effects on the environment or human health and should be recycled. The
symbol here indicates that electrical and electronic equipment should be chosen
carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com
Trouble shooting
Possible causes
Incorrect connection to
the main socket
Handle has not been laid
down
<!> "
Temp setting at "
position
Unknown malfunctions
Temp setting at NYLON
position
No water in water tank
Filter has not been well
installed into water tank.
Water tank has not been
well installed.
Defects with internai
circuit, unit corne into
self protect mode
- [email protected] - [email protected]
Solution
Re-plug the unit to main socket.
Lay handle down
Select the required ironing
temperature according to fabric
setting chart.
Take to a qualified serviceman or
manufacturer or its service agent
for examination and repair.
Select the required ironing
temperature according to fabric
setting chart.
Fill water into water tank
lnstall filter into water tank
SIide water tank into the power
base and it will be locked in place
until a "click" sound produced.
Re-energized the unit again. If
it still can not resume,please
take it to its service agent or
similarly qualified persans for
repair.
- Tél: +33 1 64 67 00 01