RIB NOVA Manual Del Usuario página 10

G
B
SETTINGS AND TRANSMITTER CONNECTIONS
J1 AD+ Feed terminal 12-24V ac/dc
AD- Feed terminal 12-24V ac/dc
SYNC
Function synchronization terminal
SW1 Micro-switches for synchronization
JP1 Limit capacity jumper (15 or 40 meters - factory setting 40 m)
DLTX
Green LED indicating correct power
STANDARD POSITIONS JUMPERS
J1
NOTE: EACH TIME A NEW JUMPER CONFIGURATION IS USED IT IS NECESSARY TO TURN OFF AND TURN ON POWER TO BOTH THE TRANSMITTER AND THE RECEIVER.
REFERENCE TO STANDARDS FOR AUTOMATIC GATES AND DOORS
The installer must ensure that the installation of the NOVA photocells is performed only in
the presence of further protection as specified by standard EN12453 in 5.5.1. (general
protection requirements).
RIB MAY NOT BE HELD RESPONSIBLE FOR DAMAGES CAUSED BY IMPROPER,
WRONG OR UNREASONABLE USE.
SETTINGS AND RECEIVER CONNECTIONS
J2
SW2
DLRX
JP1
DLTX
SW1
USES
NOVA photocells are technologically advanced and completely meet the active security
demands of all types of automatic opening systems.
They are produced in versions for wall mounting, for mounting to columns of iron or other
smooth material, or on dedicated SUPPORT COLUMNS cod. ACG8039.
10
AD+ Feed terminal 12-24V ac/dc
AD- Feed terminal 12-24V ac/dc
COM
Contact system
PHOT NC Contact normally closed NC
PHOT NO Contact normally open NO
Micro-switches for synchronization
Red LED indicating correct power and infrared signal power
STANDARD POSITIONS
J2
DLRX
SW2