Nintendo Wii Manual De Operaciones página 12

S y s t e m S e t u p
Synchronizing Your Wii Remote with the
Wii Console
This procedure allows the remote to communicate with the console.
The Wii Remote included with your Wii system has been synchronized with
the console at the factory.
There are two different modes of synchronizing (syncing).
STANDARD MODE – The Standard Mode procedure is used when adding additional
Wii Remotes to your system or if you want to re-synchronize your original remote.
Once synchronized, the remote will stay synced to the console unless you overwrite
this setting by syncing the remote to a different console.
ONE TIME MODE – This mode allows you to temporarily use your remote on a console
other than your own or to use a friends remote on your console. It does not delete
the Standard Mode setting stored in the remote. In this mode, the remote will
only communicate with the console while the power is on. When the power is turned
off the remote will lose its sync with the console.
• Only a Wii Remote in Standard Mode can turn the console power ON or OFF.
20
Standard Mode Synchronization
NOTE: Make sure you have placed batteries in the Wii Remote.
1. Press the Power button on the Wii console to turn it on.
2. Remove the battery cover on the back of the remote and press the SYNC. button
inside the cover. The Player LEDs will blink.
3. Open the SD Card Slot cover on the front of the Wii console and press the SYNC.
button on the inside of the compartment
4. When the Player LED blinking stops, connection is complete. The LED that is
illuminated indicates the player number.
This procedure must be followed for each additional Wii Remote added to
your system.
One Time Mode Synchronization
NOTE: This mode temporarily removes the Standard Mode synchronization setup for
all remotes until the power of the Wii console is turned off. When the power is turned
back on again, the Standard Mode settings will return.
1. Press the HOME Button on a remote that is synchronized with the console.
2. Select the Wii Remote Settings option from the Home Button menu, then select
the Reconnect option.
3. Press the 1 and 2 Buttons simultaneously on the remote that you want to
synchronize with the console.
• The order in which you synchronize remotes will set the player order for
multiplayer games.
4. The Player LED will blink during the syncing process. When the blinking stops,
the connection is complete.
21