Safety Instructions; Machine Data - Ferm PMM1006 Traducción Del Manual Original

PAINT/CEMENT MIXER 1400W,
2 SPEEDS
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for many
years to come.
The numbers in the following text refer to the
picture on page 2
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Introduction
The machine is only intended for mixing concrete,
cement or paint. Improper use may damage the
tool.

1. MACHINE DATA

Technical specification
Voltage
Power input
No load speed:
Gear 1
Gear 2
Whisk Ø
Weight
Lpa (sound pressure level)
Lwa (sound power level)
Vibration value
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Features
1. Switch
2. Switch lock
3. Speed control wheel
4. Speed selector switch
5. Tool mount
6. Supplementary handle
7. Ventilation apertures
8. Whisk shaft
9. Whisk paddle

2. SAFETY INSTRUCTIONS

Explanation of symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Variable speed control
230 V, 50 Hz
1400 W
Always use ear protection.
180-380/min
300-650/min
140 mm
Sound power level
6.2 kg
94+3 dB(A)
105+3 dB(A)
3.06+1,5 m/s
2
Wear eye protection
Specific safety instructions
• The tool should not be operated in damp, wet
premises; during a rain, fog and snow in the
open, and in environment with a risk of
explosion.
• The switch should be in "OFF" position before
putting the plug in the mains socket.
3