Mounting The Product; Setting Up The Product - OWIM LIVARNOLUX HG00896B Instrucciones De Utilización Y De Seguridad

Mounting the product

For HG00896B and HG00896D only (see Fig. B):
Note: You will need an electric drill to install the product.
CAUTION! RISK OF INJURY! Refer to the operating
instructions for your electric drill.
CAUTION! Ensure that you do not damage any cables in the
wall.
Use the round holes of the wall bracket
the mounting screws
Now drill the mounting holes.
Insert the dowels
Fix the wall bracket
Press the caps
Your product is now ready for use.

Setting up the product

For HG00896C only (see Fig. B):
Insert the ground spike
product is correctly seated.
Your product is now ready for use.
Insert the product far enough into the ground (lawn,
flower bed) for it to be stable.
Make sure you keep proper footing and balance at all
times. Do not use any force when assembling or setting-up
the product, e.g. hammer blows. This will damage the
product.
to mark the holes for drilling.
5
into the drilled holes.
6
using the included mounting screws
7
on the screws.
8
to the light
11
intended for
7
. Ensure the
9
GB/IE
.
5
23