Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Instruction manual
•
Unplug the appliance from the socket when changing the spare parts
or for maintenance.
•
Do not use this appliance with a damaged cord or plug or when the
appliance has malfunctions, or has been damaged in any manner. To
avoid a hazard make sure that a damaged cord or plug will be replaced
by an authorized technician(*). Do not repair this appliance yourself.
•
Do not use this appliance near direct heat sources.
•
Unplug the appliance from the socket when you are not using it.
•
Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
•
Allow the device to cool down before you are going to remove or
replace spare parts.
•
Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
•
Make sure the cord does not touch the hot parts of the appliance.
•
We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
•
Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly grab this appliance, but first pull the plug from
the socket.
•
Make sure that the maximum level will never be exceeded.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4
PaRTS DeScRIPTIoN
appliance
1. Steam release button
2. Handle iron
3. Soleplate
4. Filling cap
5. Trigger
6. Handle water tank
7. Water tank
8. Temperature knob
9. Temperature indicator
10. Thermal insulation cushion
11. Steam generator
12. Control panel
13. Cord clamp
14. Cord winding groove
2
9
3
11
12
13
14
1
8
10
4
5
6
7
Tabla de contenido
