Tabla de contenido
Idiomas disponibles
Idiomas disponibles
LF 7
GRAVITY
*Introduce the gravity of your zone before doing the first calibration.
*Introduce the gravity of destination after doing the calibration.
*The value of the gravity will be denied if it is bigger than 9.83217 ( gravity of the pole) or inferior to 9.78031 ( gravity of the
equator).
Value of factory: 9.8035
DISPLAY
LF 7
-00-
9.8035
9.8035
LF 8
INITIAL ZERO
SEtZ Y resets of the point of zero every time that the scale is begun again.
SEtZ n resets of the point zero OFF
DISPLAY
LF 8
SetZ Y
LF 8
11. GUARANTEE
This scale has a warranty against all manufacture and material defects, for a period of a year starting with the delivery date.
During this period, GIROPES, will be in charge of the repairing of the scale.
This warranty does not include the damages done by overload or wrong use.
The warranty does not cover the delivery expenses necessary for the repair of the scale.
50
DESCRIPTION AND SEQUENCE OF USE
• Press the key
to continue or the key
again automatically.
• The screen is going to show the number of pre-calibration during one second.
• Press the key
to continue.
• Use the keys
,
and
gravity ( press ESC to exit from the configuration and go back to the menu LF7)
DESCRIPTION AND SEQUENCE OF USE
• Press the key
to start or the key
automatically.
• Use the key
and then the key
exit from the configuration and go back to the menu LF8)
• Use the keys
,
and then the key
key
to exit from the menu and the scale will start again automatically.
USER'S MANUAL BR15
to exit from the menu and the scale will start
0 ~ 9
,
and then the key
to exit from the menu and the scale will start again
to choose the mode of zero initial ( press the key ...to
to continue with other adjustments o press the
EN
to introduce the value of
Tabla de contenido
