Ansel 2716 Guía De Usuario página 99

DTIM Period: A DTIM is a countdown informing clients of the next window for listening to
broadcast and multicast messages. When the wireless Access Point has buffered broadcast
or multicast messages for associated clients, it sends the next DTIM with a DTIM Period
value. Wireless clients detect the beacons and awaken to receive the broadcast and
multicast messages. The default value is 1. Valid settings are between 1 and 10.
Data Rate: You may select a data rate from the drop‐down list, however, it is
Recommended to select auto. This is also known as auto‐fallback.
N Data Rate: You may select a data rate for 802.11n from the drop‐down list, however, it is
recommended to select auto. This is also known as auto‐fallback.
Preamble Type: Select a short or long preamble. For optimum performance it is
recommended to also configure the client device as the same preamble type.
4.2.2.4. AP Profile
This page allows you to configure the profile of the Client Bridge including Security Setting exactly
the same as the Access Point.
4.2.2.5. WMM
Agricultura 111 Piso 1, Colonia Escandon, Cp 11800 Mexico DF
55 52714421, 52774459, 52719163 Fax 52718216. [email protected] Hoja 99 de 135
Intelligent Networking & Internet Solutions
www.ansel.com.mx