Management; Admin; Snmp - Ansel 2716 Guía De Usuario

4.6. Management

4.6.1. Admin

Change current login password of the device. It is recommended to change the default password
for security reasons.

4.6.2. SNMP

Allows you to assign the contact details, location, community name and trap settings for SNMP.
This is a networking management protocol used to monitor network-attached devices. SNMP
allows messages (called protocol data units) to be sent to various parts of a network. Upon
receiving these messages, SNMP compatible devices (called agents) return data stored in their Management Information Bases.
SNMP Active: Choose to enable or disable the SNMP feature.
SNMP Version: You may select a specific version or select All from the drop down list.
Read Community Name: Specify the password for access the SNMP community for
read only access.
Set Community Name: Specify the password for access to the SNMP community with
read/write access.
System Location: Specify the location of the device.
System Contact: Specify the contact details of the device.
Trap Active: Choose to enable or disable the SNMP trapping feature. .
Trap Manager IP: Specify the password for the SNMP trap community.
Trap Community: Specify the name of SNMP trap community.
Agricultura 111 Piso 1, Colonia Escandon, Cp 11800 Mexico DF
55 52714421, 52774459, 52719163 Fax 52718216. [email protected] Hoja 128 de 135
Intelligent Networking & Internet Solutions
www.ansel.com.mx