Connect To The Network; Assign An Ip Address - Axis M32 Serie Guia De Instalacion

AXIS M32 Series Installation Guide

Connect to the network

1. Connect the camera to the network using a shielded network cable.
2. Check that the indicator LEDs indicate the correct conditions. See the table on page 5 for
further details. Note that some LEDs can be disabled and may be unlit.

Assign an IP address

Follow these instructions to assign an IP address or
AXIS M32 Series
to the Internet.
Assign an IP address
Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server the AXIS M32 Series will use 192.168.0.90 as
the default IP address.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install,
use the method that best suits your purpose.
Both of these free applications are available on the Axis Network Video Product CD supplied with
this product, or they can be downloaded from www.axis.com/techsup
Method
AXIS IP Utility
See page 8
AXIS Camera Management
See page 9
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the
operating systems, see page 13.
see page 13 for other methods of connecting the
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7
AXIS M32 Series
, e.g. in other
Page 7