Mounting Diagram - Chauvet DJ Festoon Guía De Referencia Rápida

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Mounting
Before mounting this product, read the

Mounting Diagram

Festoon Controller
Festoon String
This end goes to the controller. You
may use the extension string if you
need more distance for mounting.
Your Festoon string comes with an IP rated cap meant to terminate the end of the festoon string. Retain this cap,
and ALWAYS terminate the open end of your string when being used outdoors or near moisture.
The Festoon Controller is IP20 rated. Keep it away from water, solvents and chemicals. Take care
to site it away from potential water hazards, for example, avoid installing it where excessive
humidity and condensation may occur.
Festoon QRG Rev. 1
QUICK REFERENCE GUIDE
Safety
Notes. Always use a safety cable.
M12 Mounting Hole
Rear Keyhole Mounting
Safety Cable Pass-thru
This end goes to additional
Festoon Strings (Festoon EXT).
If you are not using additional
strings, terminate the end of
the cable with the provided IP
rated cap.
EN
5
Tabla de contenido
loading

Tabla de contenido