Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
Press
button (14) to turn on the unit.
When the unit is on, press and hold
button (14) to turn the unit off.
FACEPLATE RELEASE
Press
button (2) to detach the
removable faceplate.
SOUND ADJUSTMENT
Shortly press SEL/MENU button (26) to
enter
AUDIO
SETTING
SEL/MENU button (26) or
select the desired adjustment mode. The
adjustment mode will change in the
following order:
Bass/Treble/Balance/Fader/Sub-woof/ON/
OF(Exit)
Shortly press / (25) to adjust the sound
quality up or down step by step, press and
hold / (25) will change the sound quality
continuously.
Shortly press MUTE button (14) will mute
the sound, press it again will resume the
sound.
LOUDNESS
Press LOUD button (24) for several
seconds to switch loudness function on,
and "LOUD" will appear on the LCD. Press
it for several seconds again to release this
function, and "LOUD" will disappear.
DISPLAY
Press DSP button (19) to change display
mode.
EQUALIZATION
Press EQ button (22) shortly to turn on
equalization function and to select desired
audio mode. There are five kinds of mode
as below:
→FLAT→CLAS→POP M→ROCK→DSP OFF
RESET FUNCTION
RESET button (29) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
-
-
-
Note: if press RESET button (29), the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
mode,
use
socket on the front panel.
/
(1) to
MODE SELECTION
Shortly press MOD button (5) to change the
mode among: Radio, CD, USB, CARD,
IPOD (optional), AUX and BT Audio.
SYSTEM SETTING
Press and hold MENU button (26) on the
front panel to enter SYSTEM SETTING
mode.
Use SEL button (26) or
the item you want to change, and use
setting.
1) BEEP: ON/OFF
2) P-VOL Select
3) Area: Europe/USA Use
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (30)
on the front panel. After finishing the
connection, you can press MOD button (5)
on the front panel to switch the mode to
AUX IN mode.
32
Initial installation of the unit when all
wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
/
(25) to change the corresponding
To turn the beep sound on/off when
pressing the buttons on the front panel
You can setting the turn on volume. Evey
time turn on the unit the volume will be
the same as you setting.
select Europe or USA.
/
(1) to select
/
(25) to
Capítulos
Tabla de contenido
