Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CLEANING, MAINTAINING, STORING
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
Model OT10
4.
Using the supplied allen key [15] [B], loosen the allen key [16] on the knife
head [5].
The allen key is on the underside of the charger.
5.
Press against the knife head from the bottom and detach it from the
device [B].
Model OT11 / OT11B
6.
Press against the knife head from the top and detach it from the
device [A].
7.
Using the cleaning brush [1] , remove hair between the inserts [C].
Oiling the knife head
The knife head must be oiled daily at the toothing and the contact surface (see
illustration [D]).
1.
Before oiling, remove hair residue using a cleaning brush.
2.
Use only supplied oil [2].
You can reorder oil from service (see reverse page of this manual).
Notice
When oiling the OT11B model, pay attention that oil does not penetrate
between the housing and the LED light [6].
14
Cleaning the contacts
Charging may be interrupted or impaired if the contacts [10] on the device or
on the charger are soiled.
1.
Clean the contacts using a cloth moistened with alcohol or spirit.
2.
Dry the contacts.
Use only a charger with dry and clean contacts.
Storing
If you do not wish to use the device for a longer period, store it only in the
charged state.
Storage should be in a cool, dry and frost-free place (optimally 15 °C).
This prevents premature aging of the battery.
Do not wind the power cable around the device as it can break.
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
Troubleshooting
What to do if ...
Fault
Rectification
... the device cannot be
•
If the battery has drained, charge the device
switched on
using the charger [11].
•
... knife head is
Clean and oil the knife head [5].
"plucking" hair
... LED charge level
•
Clean the contacts [10].
indicator does not glow
•
The device does not rest properly in the
charger. Position it correctly.
•
Connect the plug-in power supply unit properly.
•
Power cable or the plug-in power supply unit is
defective.
•
The battery has discharged deeply and
requires distinctly longer charging time than the
normal time.
23
24
TROUBLESHOOTING
The device switches off automatically
... the device switches
•
If the battery has drained, charge the device
off automatically
using the charger [11].
... run duration with
•
Clean and oil the knife head (s. illustrations [C]
battery charging is
and [D])
distinctly shorter than
before
... battery does not
•
Send the device to the service address
charge
specified on the reverse side of the manual.
Notice
According to the current state of the art, parts of electronic devices are subject
to a certain extent to wear through use.
To ensure flawless function and safety, we recommend regular inspection of
the device by service (see reverse page of this manual).
15
Capítulos
Tabla de contenido
