Downloading The Data Recorded By The Simple Logger ® Ii - Chauvin Arnoux SIMPLE LOGGER II Manual De Usario

®
Simple Logger II DataView
5) a "YES" reply moves the main window of DataView
new help window for the definition of new plots from predefined models (see figure 2-9 below);
This window is used to determine the type of curve that it is desired to obtain with the data just acquired. A
type of plot is proposed, but it is possible to choose another type.
6) after choosing the type of plot, click on "OK". In the main window of DataView
containing the desired type of graph is then displayed.
7) to save this report, click on Save in the File menu and save the file in the directory of your choice.
2.8 Downloading the data recorded by the Simple Logger
The various measurement data recorded by the logger are transferred to the database in the computer using
the "Download" command (this transfer is possible only if at least one recording has been made, with data
corresponding to at least one measurement).
The transfer of the data to the PC does not delete the data in the instrument.
The transferred data will be saved only if they are recorded in a database.
Downloading data :
1) select Download from the Instrument menu of the Simple Logger
button in the toolbar. A new window informs you of the progress of the transfer;
2) once the transfer is completed, the "Save as" dialogue window is displayed;
3) specify the name of the database in which the data will be recorded. If a database with this name
already exists, you are asked if you want to replace the existing data in this base with the new data;
if you reply YES, the old data will be overwritten (erased); if you reply NO, you will be prompted to
propose another name for the database.
4) once the name has been determined, enter the various information concerning the recording, then
click on OK;
®
to the background; its place is taken by a
Figure 2-9
English
®
, a report
®
II
®
II or click on the Download
Page 42