Daewoo International DTD-3000 Manual De Instrucciones página 24

Preparing the Telephone
Charging the batteries
Before the handset is used for the first time, insert it in the base station / charging station
for at least 14 hours.
When the handset is inserted in the base/charging station properly, you will hear an acoustic confirmation
signal and the charge control lamp lights up. The handset warms up during the charging process. This is
normal and does not represent a risk. Do not charge the handset with charging units from other
manufacturers.
The current battery charge status is indicated in the display:
Full
Setting the display language
Select a language (cf. "Menu Structure"):
> PERSONAL SET > LANGUAGE >...
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 14 for the sequence of menu option selections.
Auto answer / Auto hang-up
If this feature is enabled, the telephone automatically takes a call when the handset is removed from the
base station and automatically ends the call when it is put back in the base station. Use the menu to
activate or deactivate these functions. Refer to Page 15 for the sequence of menu option selections.
Private branch exchanges
The information on Page 16 explains how to install your telephone in a private branch exchange.
Low-radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT cordless telephones
when in Standby mode (when the handset is on the base station).
In talk mode, radiation is reduced (depending on the distance between the handset
and base station).
Default setting = ECO MODE → OFF
The telephone can be set up so that the radiation frequency is reduced;
If necessary, you can increase the range of the telephone system by switching ECO
mode off;
4
All manuals and user guides at all-guides.com
Half empty
Page 15 (ECO MODE → OFF).
Low
Page 15.
Empty