DAY Useful Everyday 72543 Manual De Instrucciones página 48

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
Temperature Detection and temperature
trend
The current indoor temperature and the
temperature trend (indoors) are shown in
the LCD display.
After successfully connecting with
the remote sensor, the main unit can
display the remote temperature and the
temperature trend (remote)
You may see the following displays:
Arrow up : The temperature/humidity is
rising.
Arrow down : The temperature/
humidity is falling.
No display: The temperature/humidity is
remaining constant.
Indoor temperature measuring range:
0°C (+32°F) ~ +50°C (+122°F), LL.L °C(°F)
will displayed if value lower than 0C
(+32°F), HH.H °C(°F) will displayed if value
higher than +50°C (+122°F).
Outdoor temperature measuring range:
40°C (-40°F) ~ +70°C (+158°F), LL.L °C(°F)
will displayed if value lower than -40°C
(-40°F), HH.H °C(°F) will displayed if value
higher than +70°C (+158°F).
48
Rainfall Readings
Press the "RAIN/ALERT" button to view
different rain readings, users can choose
to view the value of rainfall over time,
by pressing the "RAIN/ALERT" button,
you can view the rain data for "NOW"
"1 HOUR" "24 HOURS" "TODAY" "7 DAYS"
"MONTH" "YEAR" and "TOTAL".
NOW: Rain from the start of a rain event,
until no rain has accumulated for 30
minutes, resets to zero after 30 minutes
of no additional rainfall.
1 HOUR: Rainfall that has accumulated
during the past hour (Example: current
time is7:31, 1HR rain is accumulated total
between 6:32 to 7:31.)
24 HOURS: Rainfall based on past 24
hours of time. At each full hour, 1 hour
is recorded, which is the sum of the
accumulated value of 24 hours.
TODAY: The accumulated rainfall value of
today's day is accumulated from 0:00 to
23:59, and is reset again after 0:00.
7 DAYS: Rainfall of last 7 consecutive
24HR rain readings, updates each day
at 0:00, not a subject to the calendar, be
sure time is set.
MONTH: Rainfall this month (Ex: 1-31
January), reset data on the � rst day of
each month.
YEAR: Rainfall this year, current year
starting 1 January.
TOTAL: The amount of rainfall
accumulated from the power or reset of
the main unit.
Press the "HIST/UP" and "DOWN" buttons
simultaneously for 3 seconds to reset the
rain reading.
Note:
This will not affect the 12 month history
readings which are stored in memory.
Tabla de contenido
loading

Tabla de contenido