MAINTENANCE
CLEANING
TROUBLE-
SHOOTING
Clean all the external parts and shelves using a clean cloth dampened with water and
alcohol.
Dry the surfaces and remove any residue.
For the disinfection of the external surfaces use either denatured alcohol or detergents
with a minimum percentage of sodium hypochlorite (or equivalent).
A:
Power supply failure on the equipment installed
Check:
•
the automatic breaker of the switchboard,
•
the mains fuses on the right column of Millrack. If needed, replace with equal
value and type (T20A 250V - 16x32mm).
I
F THE PROBLEM REMAINS
M
REPORTING
PLATE AND WARRANTY CERTIFICATE
B:
Water leaks from the Millrack bottom
Check:
•
the external hydraulic connections on Millrack and on the equipment,
•
if the cause is due to leaks on internal connections, call the Technical
Support.
NOTE
,
T
CALL THE
ECHNICAL
. T
ODEL AND SERIAL NUMBER
HESE DATA ARE ON THE FACTORY
.
S
(
)
UPPORT
SEE NEXT PAGE
15