Electrical Connections - Mocom millrack Manual Del Operador

ELECTRICAL
CONNECTIONS
14
Switchboard
The electrical installation for the Millrack must be properly sized according to the
maximum consumption.
Install a switchboard provided with automatic breaker, 250V, 20 A, minimum distance
between contacts 3mm and certified according the applicable standards.
I
NSTALL THE SWITCHBOARD SO THAT IT IS EASILY ACCESSIBLE
THE ELECTRICAL SYSTEM MUST BE EQUIPPED WITH GROUND
COMPLIANT WITH THE STANDING NORMS.
Connect the three-wire cable coming from the Millrack to the switchboard terminals.
Equipment power supply connection
Connect the plugs of the equipment's power cords to the Millrack sockets.
DO NOT EXCEED THE MAXIMUM POWER CONSUMPTION OF
3545 W.
THIS VALUE IS NOT EXCEEDED WHEN ARE INSTALLED:
- No. 1 Milldrop
- No. 1 Millseal / Xelia
- No. 1 Mach
- No. 1 Sterilizer series Millennium
Equipment installed on the bottom
N
O ELECTRIC CONNECTION IS INTEGRATED ON
S
TERILIZER OR FOR THE
THEREFORE IT MUST BE MADE APART BY THE USER
NOTE
DANGER
WARNING
3 9
/ Mach
Milldrop
Millseal
Xelia
Millennium
Mach 3 /Mach
NOTE
M
ILLWASHING INSTALLED ON THE BOTTOM
.
9
M
ILLRACK FOR AN ADDITIONAL
;
.