Attaching The Cuff To The Monitor; Taking Your Blood Pressure - Life Sourse UA-851 Manual Del Usuario

ATTACHING THE CUFF TO THE MONITOR

After installing the batteries, you
must attach the blood pressure cuff
to the monitor. To do so, insert the
Air Connector Plug of the blood
pressure cuff into the Air Socket of
the monitor firmly.
NOTE: Be sure to differentiate the
Air Socket from the AC Adapter
Jack. The Air Connector Plug will
only securely fit into the correct
jack.

TAKING YOUR BLOOD PRESSURE

Tips for Blood Pressure Monitoring:
☞
Relax for about 5 minutes before measurement.
☞
Do not smoke or ingest caffeine at least 30 minutes prior to
measurement.
☞
Remove constricting clothing and place cuff on bare arm.
☞
Unless your physician recommends otherwise, use left arm
to measure pressure.
☞
Do not talk during measurement.
☞
Do not cross legs and keep your feet flat on floor during measurement.
Now you are ready. Follow these simple steps:
1. Sit comfortably with your left arm resting on a
flat surface so that the center of your upper arm
is at the same height as your heart.
E-6
LifeSource Health Line (Toll-Free): 1-888-726-9966