Power Switch - Duraflame DFI-470-04 Manual De Instrucciones

OPERATION INSTRUCTIONS
Thermostat Dial
1. Set the thermostat knob
to turning clockwise to
allow the heater to warm
up the room.
2. When the desired
comfort level is reached,
lower the thermostat
knob counter clockwise
until the unit shuts off.
3. The heater will now
automatically maintain
the desired comfort level
by cycling the heater
on and off.
Note: Day to day changes
in room or outdoor
temperatures can effect the
thermostat. Readjust the
thermostat if needed.
A621
Heater Switch
1. The 1000W switch will turn on the
heater to the low heat setting and
will also turn the heater off.
2. Turning on both the 1000W and
1500W switches will turn on the
high heat setting.
High Heat--1000W(ON)+1500W(ON)
Low Heat--1000W(ON)+1500W(OFF)
Control Panel Location

Power Switch

1. This switch turns
on and off the
main power.
2. The switch will be
illuminated when
the heater is on.
3. This switch needs
to be on in order
to use the heater.
5
Control Panel
Flame Brightness
Dimmer
1. Turning the dial
clockwise will
increase the
brightness of the
flame effect.
2. Turning the dial
counter clockwise
will decrease the
brightness of the
flame effect.
www.tsicustomerservice.com