OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
ACTION
BEFORE OPERATION
Charging the battery pack
Installing/Removing the battery pack
OPERATION
Switch Button Functions
1st
2nd
3rd
4th
5th
6th (Press & Hold)
FOUR FUNCTION MODES
1. FLASHLIGHT
- Press function switch button(5) the first time, the LED light is on. This tool is in down position.
WARNING! Do not direct the light beam into eyes.
2. LANTERN
- Pull light stick(3) partly out of the handle. This tool is in middle position.
- Press function switch button(5) the second time, the light stick is on.
NOTE: If the light of lantern is too bright, push part of the light stick back into the handle.
WARNING! Return light stick into handle with caution so as not to pinch hand or fingers.
3.1 DESK LAMP HI
- Pull light stick (3) until the pivot joint(4) out of the handle. This tool is in top position.
- Rotate the pivot joint to desired position.
- Press function switch button(5) the third time, half side of light stick is on with high light.
NOTE: Adjust the pivoting head to desired position according to the working need. The max
angle of the pivoting head is±72°.
3.2 DESK LAMP LO
- Press function switch button(5) the fourth time, half side of light stick is on with low light. This
tool is still in top position.
NOTE: Adjust the pivoting head to desired position according to the working need. The max
angle of the pivoting head is±72°.
NOTE: After adjusted pivoting head to the desired angle, the light stick itself can still rotate.
The fine-tuning angle of the light stick (3) is±45°.
WARNING! Adjust the pivoting head carefully so as not to pinch hand or fingers.
4. SOS
- Back the pivot joint(4) into the handle, keep the light stick (3) on the outside. This tool is in
middle position.
- Press function switch button(5) the fifth time, the light stick is in SOS mode.
WARNING! Return light stick into handle with caution so as not to pinch hand or fingers.
LED 4-in-1 Light
Flashlight
Lantern
Desk Lamp Hi
Desk Lamp Lo
SOS
OFF
FIGURE
See Fig. A
See Fig. B
See Fig. C
9
See Fig.
D1,D2
See Fig.
E1, E2, E3
See Fig.E4
See Fig.E5
See Fig.F
EN