General Safety Instructions; Designated Use - Kübler HW 66 Manual Del Usaurio

Mounting and Operating Instructions
Energy and time meters
HW 66 and HW 66 M
R60703.0009 - Index 3
1.1 Safety instructions and warnings
Only use this display
– in a way according to its intended
purpose
!
– if its technical condition is perfect
– adhering to the operating
instructions and the general
safety instructions.

1.2 General safety instructions

Observe the nominal voltage before operating
the device, see type plate. Make sure that the
connection lines are not damaged and that they
are disconnected while wiring the device.
Cleaning:
With power disconnected, the meter can be
cleaned with a dry cloth or a cloth moistened
with soap solution. Under no circumstances must
corrosive or solvent-containing substances be
used for cleaning.
Maintenance:
The HW 66 is maintenance-free. In case of
damages caused by transport or storage the
operator is not allowed to carry out repairs.
Guarantee:
Opening the meter will void any warranty claim.
In addition, the calibration of calibrated measu-
ring devices will become invalid.

1.3 Designated use

The local standards, guidelines, directives and
regulations must be observed. The installation
of the meter must be carried out by expert and
trained personnel only. Protect the meter against
humidity when storing and transporting it and do
not operate it outside of the specified technical
data.
Sealing:
The meter is not equipped with a lockable cover,
thus there is no possibility of sealing.
To meet the requirements according to
EN 50470-1, art. 5.5, in case of an accounting
device, the housing that contains the meter must
be sealable.
EN-page 4
1.
2.
3.
4.
1. Operating hours display
2. Serial number with bar code 128
3. LED operation control
4. Energy consumption dislpay
1.4 Description:
The double display of kWh and time has been
especially developed for making the accounting
of rental devices and machines exact and repro-
ducible. The meters of the HW 66 series are
tamper-proof and show both values even with
power disconnected. The kWh display of the MID
counter HW 66 M is factory-calibrated and may
be used for accounting purposes.
This hour meter shall not be used for electric-
ity consumption invoicing.
2. EC Declaration of Conformity
HW 66 and HW 66 M
• EN 50470 Part 1 and 3
(electricity metering equipment (a.c.))
Only HW 66 M
• Directive 2014/32/EU of the European
Parliament and the Council on Measuring
Instruments
• Appendix I, Basic requirements
• Appendix MI-003, electricity meter for the watt-
hour consumption
Year of issue of the EC Declaration of
Conformity, see print on the device.
Example: Declaration of Conformity for 2018
CE M18 1259
Validity 8 years (e.g. M18 valid until 2026)
www.kuebler.com