Steps for cleaning grill
1. Let the grill cool down before placing Grillbot on
the grill. The grill temperature must be below 95 °C
degrees once Grillbot is placed on the grill. Holding
Grillbot from the top-side (NOT THE BRUSH SIDE
!) place on grill grate making sure barbeque is on
a level surface for both safety and most effective
cleaning.
2. Press button once for 10 a minute clean , twice
for a 20 minute clean or three times for a full 30
minute clean.
3. There is a 5 second delay allowing for grill placement.
4. Grillbots LCD display and timer will countdown until
cleaning is done..
5. Clean both sides of your grill by flipping the grate and
running Grillbot again.
Always CLOSE grill lid when using your Grillbot. While Grillbot is rugged
and sturdy and bump resistant, malfunction may occur if dropped.
The grill lid should ALWAYS be closed when Grillbot cleans. If the lid is
not closed Grillbot can drive across the edge and fall to the ground.
Stop cleaning
Manual stop
Auto stop
To manually turn off, press and hold button for
10 seconds or until you hear a beep.
Alarm will sound to let you know when
cleaning is finished. Your Grillbot will turn off
automatically when job is done.
31