Mounting Precautions; Supplied Components - Sharp PN-K321 Manual De Instalación

• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
required.
• To install on a stand (commercially available) or on a wall,
or to remove or move the monitor, consult your dealer.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this work
yourself. Our company will bear no responsibility for accidents
or injuries caused by improper mounting or mishandling.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 25
degrees upward or 20 degrees downward.
• This monitor should be used at an ambient temperature
between 32°F (0°C) and 104°F (40°C). Provide
enough space around the monitor to prevent heat from
accumulating inside.
For the monitor in landscape orientation
2
[5]
For the monitor in portrait orientation
7-7/8 [20]
2
[5]
2 [5]
* When you install this monitor on a wall, the monitor
emits heat during operation, please be aware that this
heat may discolor or alter the wall.
• If it is difficult to provide sufficient space for any reason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of 32°F (0°C) to 104°F (40°C), install a fan or take other
measures to keep the ambient temperature within the
required range.
If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1  Power cord: 1  AC adapter: 1  CD-ROM (Utility Disk for Windows): 1
 Setup Manual (this manual): 1  DisplayPort cable: 1  RS-232C conversion cable (Φ3.5 mini-jack): 1
 Pedestal (for stand): 1  Strut (for stand): 1  Attachment plate (for stand): 1 (preinstalled on monitor)
 Countersunk screws (M4 x 6 without washers): 5  Screws (M4 x 10 with washers): 4  Hex wrench: 1
 Cable clamp: 2  Cable clamp (small): 1  Cable clamp (large): 2  Vertical sticker (Logo): 1
 Vertical sticker (Operation buttons): 1  Vertical sticker (Blank): 1  Horizontal sticker (Operation buttons): 1
 Cover Sharp logo: 1 (Place this sticker onto the SHARP logo to cover the logo.)
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
4
E

MOUNTING PRECAUTIONS

Unit: inch [cm]
7-7/8 [20]
*
2
[5]
2 [5]
Unit: inch [cm]
*
2
[5]

Supplied Components

• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• When installing the monitor in
landscape orientation, you can
attach the supplied horizontal
sticker (Operation buttons) to
the right side.
• Use the supplied vertical sticker when you install the
monitor in portrait orientation.
Attach the vertical sticker (Operation buttons) to
the back or the front.
• Back
Vertical sticker (Operation buttons)
• Front
Vertical sticker (Blank)
Vertical sticker (Operation buttons)
Vertical sticker (Logo)
Horizontal
sticker
(Operation
buttons)
Cover
Sharp logo