Narex distributor or simi-
lar qualified person in or-
der to avoid a hazard.
• In no circumstances
should the power supply
cord be wrapped around
fingers or any part of the
operators person.
2.2
Hazardous dust
WARNING
Hazardous materials.
Vacuuming up hazardous
materials can lead to seri-
ous or even fatal injuries.
The following materials
must not be picked up by
the machine:
• hot materials (burning
cigarettes, hot ash, etc.)
• flammable, explosive,
aggressive liquids (e.g.
petrol, solvents, acids,
alkalis, etc.)
• flammable, explosive
dust (e.g. magnesium or
aluminium dust, etc.)
For standard machines
(with type designation -21,
-71) following further ap-
plies: The following materi-
als must not be picked up
by the machine:
• Hazardous dust.
2.3
Spare parts and accessories
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or
function of the appliance.
Only use original spare parts and accessories from
*) Optional accessories / Option depending on model
OEL=Occupational Exposure Limit
1)
CAUTION
Narex. Spare parts that can affect health and safety
of the operator and or function of the appliance, are
specified below:
Description
Flat filter PTFE, 1 pcs.
Fleece filter bag, 5 pcs.
Disposal bag, 5 pcs.
Motor cooling air filter PET, 1 pcs.
2.4
In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced
by the presence of volatile liquid or inflamma-
ble gas or vapour.
3
Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains volt-
age.
•
Ensure that the voltage shown on the rat-
ing plate corresponds to the voltage of the
local mains power supply.
3.1
Starting and operating of the machine
Check that the electrical switch is switched off (in
position 0). Check that suitable filters are installed
in the machine.Then connect the suction hose into
the suction inlet at the machine by pushing the hose
forward until it fits firmly in place at the inlet. Then
connect the tubes with the hose handle, twist the
tubes in order to ensure that they are properly fitted.
Attach suitable nozzle to the tube. Choose nozzle
depending on what type of material that is to be
picked-up. If used for dust extraction in connection
with dust producing tool then connect end of suction
hose with appropriate adapter. Connect the plug into
a proper electrical outlet. Put the electrical switch
into position I in order to start the motor.
Turn I: Activate the machine
Turn 0: Stop the machine
Turn I: Activate the machine –
turn clock wise for speed control
Turn 0: Stop the machine
Turn
operation – turn counterclockwise
for speed control.
English
Order No.
65404430
65404431
65404432
65404433
: Activate Auto-On/Off
37