Joerns Oxford Low Profile Weigh Scale Manual De Instrucciones página 6

Oxford
®
Low Profile Weigh Scale
Connection of the Spreader Bar/Cradle:
To connect, raise the spreader bar/cradle up towards the boom slot. Once aligned in the boom
slot reinsert the quick release pin fully into the fulcrum bush until it locks into position. YOU
MUST CHECK THAT THE PIN IS SECURELY FITTED; a noticeable "click" will sound when the
connection has been made secure.
To do this, press your finger into the barbed end. If the pin remains stationary the lift is safe to use
(Fig. 3).
The pin and fulcrum bush must engage through the boom slot. If the fulcrum bush
becomes misaligned this may result in serious injury/death.
6
WARNING
English
Fig. 3