Tabla de contenido
Hinge
ZO
Arm
DOOR
FIG. 18A
18) To attach the door to the unit, slide the hinge arms onto the hinge plates as shown in
FIGURE 18A. Tighten the screw marked '2' in FIGURE 18B to fasten hinge. The door may need
to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust,
follow instructions in FIGURE 18B.
YA
x 1
ZR
x 1
19) Attach Knob (YA) to Door (N) with #8 x 1" Machine Screw (ZR). Attach Pads (ZD) to inside edge
of door where they will contact the vertical divider. See FIGURE 19.
ZR
x 2
FIG. 20
20) Attach Towel Bar (X) to right side apron using #8 x 1" Machine Screws (ZR). See FIGURE 20.
Page 14 — 140W
ZP
2
ZD
x 2
FIG. 19
Side adjustment 4mm (5/32")
To move the door towards the side
3
panel, loosen screw '1' and tighten
screw '2'. To move the door away
from the side panel, loosen screw
'2' and tighten screw '1'
Depth Adjustment 4mm (5/32")
2
Loosen screw '2' (Just one turn),
adjust door to desired position,
re-tighten screw.
3
Height Adjustment 4mm (5/32")
1
Loosen screw '3', adjust door to
desired position, re-tighten screw.
FIG. 18B
Tabla de contenido
