Maintenance; Spare Parts - Sagola DRY TECH DT2 Manual De Instrucciones

9. Maintenance

In order to keep the drier in optimal working condition, it is necessary to regularly:
ALL EXAMINATION, MAINTENANCE CHANGING OF LAMP OR REPAIRS MUST BE REALIZED
ONLY AFTER HAVING DISCONNECTED THE MACHINE FROM THE MAIN POWER SUPPLY
- Clean the lamps and reflectors with a dry cloth. Do not use abrasive or aggressive products
(solvents, abrasives...). Do not clean while the lamps are hot.
- Avoid all contact between products and the heating modules.
- Lubricate all pivot points.
Light Tube Replacement
a) Prepare the cassette which needs
replacement.
b) Remove the grille of cassette.
c) Remove the plates from both ends of the
cassette.
d) Remove the fixed plates from both ends
of the cassette.
e) Loosen fixed screws and cut off
connections, the light tube can be replaced.
f) Repeat the steps above in reverse order to
replace the light tube.
10. Repuestos
1. Light tube
1,000 w DT2
01/1 Gold coated
01/2 Red
4. Power switch ON/OFF
7. Plastic nut
2. Wheel with brake
5. Timer
Nº Cod. U.
01/1 49000776 1
01/2 49000785 1
02 49000778 1
03 49000779 1
ENGLISH
c)
3. Wheel without brake
6. Clamp
Nº Cod.
04 49000770
05 49000771
06 49000773
07 49000777
b)
d)
U.
1
1
1
1