Introduction; Warnings - Sagola DRY TECH DT2 Manual De Instrucciones

1. Introduction

Thank you very much for purchasing a product SAGOLA. We are glad you found a customer.
The SAGOLA products meet the highest technical progress, design and ease of use. We apply the
most strict quality requirements of our products to satisfy the most demanding expectations.
To know how to correctly use your equipment, read this manual carefully. After you have finished
reading it, keep it in a secure place for future reference.

2. Warnings

Before starting the installation or operation of the equipment, read the instructions in this manual
to avoid possible damage to both people and equipment and to obtain the highest performance.
1.- The equipment must be grounded.
2.- Protect the equipment from:
- Liquid and moisture. Not put any object containing liquid on the equipment.
- Shock and mechanical stress.
- Cold, heat and extreme temperature changes.
- Flames and flammable objects.
3.- The equipment should not be used in spraying areas where there is a high concentration of
solvents, until the complete removal of all flammable composite and eliminate any risk of
inflammation.
4.- Engage the locking brake equipped on the rear wheel before any use of the equipment.
5.- To move the equipment remove the lock of the rear wheels. Never pull from electric cord.
6.- Avoid moving the equipment when is in operation.
7.- Avoid touching the panels (radiants) during the work cycle and immediately after completion of
the cycle, as the surfaces may still be hot.
8.- For best performance of the equipment, always use original spare parts SAGOLA.
If in doubt about the installation and operation of equipment, contact with SAGOLA.
9.- Do not use this appliance in a hazardous environment. Do not use this appliance in wet
surroundings or expose it to the rain.
10.- Do not use the appliance for operations other than those or which it was designed.
11.- Use in a painting area is permitted provided that it is free of solvent fumes.
Spraying equipment must be disconnected and a ventilation system lust be operating.
12.- Follow directives for preventing work accidents. DO not look at the infrared emitters
and avoid direct, prolonged heating of al parts of your body.
13.- Any intervention on this machine must be realized by a qualified technician.
14.- Don't touch the lamp with your fingers.
If in doubt about the installation and operation of equipment, contact with SAGOLA.
ENGLISH