How To Procede If - Lotus PFDG Serie Manual De Instruciones Para El Uso

Warning! :
Problems and failures may occur even when the appliance is used properly. Here is
a list of the mist probably situations and controls that the operator should perform
to avoid applying to a service centre unnecessarily.
If the problem is not solved after the necessary controls, turn off the appliance
immediately, unplug it, cut off any supplies and apply to a service centre.
DISPLAY MSG
Instruction manual and use
Kettles PF..
4.3 HOW TO PROCEED IF ...
DESCRIPTION
Intervention of the safety thermostat:
apply to a service centre for assistance.
Overheating in the relay card.
Automatic intervention to save the appliance electric circuit.
The alarm stops automatically when the electric circuit temperature
return into the values pre-established (< 60° C).
Anomaly in the ventilation system:
Apply to a service centre for assistance.
Damaged temperature probe (message flashing):
Apply to a service centre for assistance.
Tank temperature probe (optional) broken or not connected
(flashing message):
Apply to a service centre for assistance.
Error in connection between relay Board and the keyboard tab.
(The possible presence of moisture in the relay Board):
Apply to a service centre for assistance.
(model PFIG-PFIE)
Insufficient water level in the jacket to enable heating.
Failure in the automatic water fill system of the jacket.
Apply to a service centre for assistance.
GB-PF-DU-02
Pag
17 di 18