Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
USER INSTRUCTIONS
ISTRUZIONI D'USO PER L'UTILIZZATORE
CHANGE T
set
TEMPERATURE DEFAULT
From the current
mode it is possible to
change the setting of
the
T Set
temperature by
directly pressing the
or
, key, the new
setting will be
instantly stored.
Note: every time a
pressed a variation of 0.1 degrees is
set; a faster flow of readings is
achieved by holding the key
pressed.
Or:
Press one or more
times the
Mode
key until the required
function mode
is displayed.
3°
within 5 seconds,
press the
key to
increase the
T Set
reading or the
key
to reduce it.
After
5
seconds from pressing a key the thermostat will
regain the previous function
28
ON
ON
T
Set
or
key is
1°
T
Set
2°
The thermostat temperature can be set at da +5 °C a 37,7 °C
(+41,0 °F ÷+99,9 °F) withtemperature readings which satisfy
the following conditions:
Winter:
"Comfort"
temperature setting higher or the same as
the winter economy temperature
Summer:
"Comfort" temperature setting lower or the same as
summer economy temperature.
The T set temperature manufacturer's default are the following:
Winter Mode
(heating):
"Comfort" temperature
20,0 °C 68,0 °F
Boiler functioning on room temperature less than 20,0 °C / 68,0 °F
Night economy winter:
"Economy" temperature
Boiler functioning on room temperature less than 17,5 °C / 63,5 °F
Summer mode
(cooling):
"Comfort" temperature
25,0 °C 77,0
Air conditioner functioning on room temperature in excess of 25,0 °C / 77,0 °F
Night economy summer:
"Economy" temperature
Air conditioner functioning on room temperature in excess of 28,0 °C / 82,4 °F
OFF
Thermostat off (antifreeze mode):
"Antifreeze" temperature
Adjust / exclude
- Boiler functioning on room temperature less than 4,0 °C / 39,2 °F
- Air conditioning off
/
17,5
°C
/ 63,5 F
°
/
°F
28,0 °C 82,4 °F
/
4,0 °C / 39,2 °F
Tabla de contenido
