Safety Instructions - Cedes cegard/Mini-CC Guia De Instalacion

cegard/Mini-CC
Overview
All measurements in mm
Proportions not to scale
400 24 105
Grid x (mm)
Protection height y (mm)
EN 81-20 compatibility

Safety instructions

` Switch off main power to the elevator control system and
mark clearly that the elevator is out of service.
` Follow all applicable safety measures.
` Make sure that your installation complies with all
applicable standards, laws and regulations that apply
to your application. It is the sole responsibility of the
planner and/or installer and/or buyer.
` The light curtain should only be installed by authorized
and fully trained personnel! The installer or system
integrator is fully responsible for the safe integration of
the sensor.
` The cegard/Mini-CC must not be used for:
Protection of dangerous machinery, equipment in
explosive atmospheres and in radioactive
environments.
Static mounting
2
1717
2000
20 elements
84.2
1620
Yes with mounting
restrictions
Dynamic mounting
x
7
20
847
y
32 elements
57.4
1800
Yes with mounting
restrictions
Avoid damage to cegard/Mini-CC
` Never scratch or paint the optical elements! Do not
drill additional holes into the edges! Unpack edges just
before installation!
` Do not bend or twist the edges!
` Oil and other liquids can damage the cables. Avoid
contact!
` Do not directly expose the receiver edge (blue connector
plug) to other infrared light sources such as other light
curtains, fluorescent lamps and direct sunlight.
English
Ø 4.7
Ø 5.3
36 elements
45.1
1600
Yes
© CEDES | V 2.0