Winegard FreeVision FV-HD45 Manual De Instrucciones página 5

Slide the crimped end of the front assembly boom into the open end
of the back assembly boom (Figure 4). Re-insert the screw into the
plastic block closest to the mast clamp, and secure with the flange nut.
Figure 4
Front Assembly
Then, slip the phasing lines onto the threaded rivets near the reflector
brackets. Add a washer onto each rivet. Thread a small nut onto each
rivet. See Figure 5.
Figure 5
Top View
Phasing
Lines
Unfold the elements on the two corner reflectors as in Figure 6. You
should hear the pieces click into place.
Figure 6
Before
Corner Reflector
Crimped End Screw
Insertion
Reflector Bracket
Back Assembly
Mast
Clamp
Site
Side View
Phasing
Lines
After
Rivet
5