Assembling The Antenna - Winegard FreeVision FV-HD45 Manual De Instrucciones

Assembling the Antenna

Start by unfolding the VHF elements on the back assembly until the
elements are perpendicular to the boom (Figure 1). You should hear
the elements click into place.
Figure 1
Before
VHF Elements
Boom
Unfold the six UHF elements on the front assembly until they are
perpendicular to the boom. See Figure 2. You should hear the pieces
click into place. Pull the two phasing lines away from the boom.
Figure 2
Before
Boom
On the back assembly, remove the nut and screw from the plastic block
nearest to the open end of the boom and to the mast clamp (Figure 3).
Figure 3
Open End
of Boom
4
Fold out Elements
Screw
Removal
After
After
Site
Boom
Boom
Unfolded
Elements
Phasing
Lines