Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Tools required: Hex wrench (provided), Phillips screwdriver, mallet, power drill, and 3/8" drill bit.
12. Position the assembled console at the desired location against a wall. If necessary, adjust the
pre-attached Floor Levelers at the bottom of the Legs (E and F) to level the unit.
13. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint
Hardware to attach the tip-over restraint to the spine and the wall.
NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO
THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.
14. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the
console.
Assembly Instructions
8
TV
E
F
E/F
Tabla de contenido
