Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4
B
D
C
D
2-1/2" Bolt
(1 used in this step)
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Locate the Spine (D) on a scratch free surface with the adjustable holes facing up as shown.
3. Fasten the Top Shelf Frame (A) to the Spine (D) by inserting one 2-1/2" Bolts (6) with the Lock
Washers (7) and the Flat Washers (8) through the drilled holes on the lower spine and
securely screw into the Flange Nut (2). Make sure the metal tabs on the shelf frame will face
up when the unit is turned upright.
4. Fasten the Middle and Bottom Shelf Frames (B and C) to the Spine (D) using four 1" Bolts (4).
Make sure the metal tabs on shelf frames will face up when the unit is turned upright.
NOTE: The Middle Shelf Frame (B) is adjustable. Choose the upper hole sets to increase the
bottom space.
Assembly Instructions
B
C
4
⑥
6
A
UP
D
Lock Washer
(1 used in this step)
⑦
4
7
A
8
D
Flange Nut
(1 used in this step)
1" Bolt
(4 used in this step)
Flat Washer
(1 used in this step)
2
②
④
⑧
Tabla de contenido
