Greenlee GATOR LS50L2 Manual Operación página 9

LS50L2 Battery-powered Punch Driver
Setup and Operation (cont'd)
Note: Refer to "Capacity and Draw Stud Selection Guide" on page 13
for capacity, draw stud, and hardware.
Punching mild steel with
1/2" (ø 0.885" [22.5 mm])
conduit size
Material
Being Punched
1/2" (12.7 mm)
Pilot Hole
1924AA
Spacer
20963
Draw Stud
Die
Punch
1924AA
Spacer
Material
Being Punched
7/8" (22.2 mm)
Punching mild steel with
Pilot Hole
3/4" (ø 1.115" [28.3 mm])
to 1-1/4" (ø 1.701" [43.2 mm])
conduit sizes
2113B
Draw Stud
Die
Punch
Material
Being Punched
7/8" (22.2 mm)
Punching mild steel with
Pilot Hole
1-1/2" (ø 1.951" [49.6 mm])
to 3" (ø 3.539" [89.9 mm])
2113B
conduit sizes
Draw Stud
Die
Punch
9
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070