Morphy Richards 48960 Instrucciones página 4

48952MEE Rev6:9225 47507 MEE pump - Jon
Your hand blender is designed to help
you prepare everything from soups to
chocolate mousse, crush ice quickly
and chop a variety of food with
minimal effort.
The hand blender can be used with the
measuring beaker or a saucepan.
Features
⁄ Blender leg
¤ Release button
‹ Blender body
› Turbo switch
fi On/off switch
fl 8 Speed control
‡ Whisk gearbox
· Whisk attachment
‚ Chopping bowl base
(also storage bowl lid)
„ Chopping bowl
‰ Chopping bowl operating lid
 Chopper blade
Ê Wall mounting bracket
Á Wall mounting screw and
wall plug x2
Ë Plastic Measuring beaker with storage lid
Unpacking your hand blender
WARNING: Carefully unpack your hand blender, blades are
very sharp.
Wash all parts before first use, see cleaning instructions
section.
Assembling the attachments
Insert by pushing the blending leg, whisk gearbox or the
chopping bowl lid into the blender body, until it clicks into
place.
To remove the attachment press the release button.
Using the hand blender
WARNING: Make sure that the hand blender is switched
off and unplugged from the mains.
Clean the blending attachment before using it for the first
1
time with a damp cloth.
Insert the blending leg into the main housing and click into
2
place A.
The hand blender can now be plugged in and is ready to use.
3
WARNING: Do not blend in the chopping bowl or damage
will occur to the product. Use the plastic measuring
beaker.
4
29/7/09 09:48 Page 4
Place the blending leg into the food to blend, select the
4
required speed for your food on the speed control, then
press the on/off button B.
Release the on/off to stop blending.
After use, unplug the blender and remove the blending leg by
5
pressing the release button and pull gently away.
Give the blending leg a rinse with cold water. If the main
6
body has been splashed just give it a wipe with a damp cloth.
WARNING: Your hand blender is designed for intermittent
use. Do not use non-stop for more than 1 minute. Allow to
cool down for a minimum of 5 minutes before further use.
Using the chopper attachment
The chopper attachment can be used for meat, hard cheese,
nuts, herbs, boiled eggs, dry bread etc.
WARNING: Blades are very sharp.
Place the chopping bowl onto the chopping bowl base. This
1
will prevent the jug from slipping C.
Fit the chopping blade into the chopping bowl D.
2
Add food to be chopped.
3
Place the chopping lid on top, making sure that it is correctly
4
fitted on the chopping blade E.
5 Place the blender body onto the top of the chopping bowl lid
until it has clicked into place.
Plug the blender into the mains socket and press the on/off
6
switch, holding the blender and jug firmly on the work
surface.
Note: Your hand blender is not suitable for grinding coffee
beans.
When chopping meat ensure that all the bones have been
removed, before adding to the bowl.
Using for Ice crushing
The blender leg is fitted with a special blade suitable for
crushing ice. It can be used to crush ice cubes to produce
fine ice for cocktails, cold drinks etc.
Place a maximum of 4 ice cubes in the plastic measuring
1
beaker.
2 Press firmly down on the ice cubes with the blender using
a plunging action until the ice cubes are fine ice pieces.
Using whisk attachment
1 Insert the whisk attachment into the whisk gearbox F.
Place the whisk gear box and whisk attachment onto the
2
blender body, by aligning the release button indent on the
gearbox until it has clicked into place G.
• To avoid splashing, start whisk on speed 1 and increase to
speed 3 if required. Do not use 'Turbo'.
Top tips
• When blending foods with strong colour (eg. carrots) the
plastic parts of the appliance may become discoloured.
Wipe with cooking oil to clean any discoloured parts.