English
System Configuration
Execute the product CD, click "Install iSignager Software" and follow the instructions to install
a
iSignager software.
Please connect network line before turn on the device. The iS-1600 obtains an IP address
b
automatically by default. The IP will be shown on the display after system startup. If there is no DHCP
server on the network, the iS-1600 will use the default IP 169.254.100.100. You can connect the iS-
1600 to a PC using a network cable and browse to http://169.254.100.100 by a web browser for web-
based configuration.
Enter the IP address of the iS-1600 in a web browser and login the system with the default user
c
name and password.
Default user name: admin
Password: signage
Go to "System administration" > "Basic configuration". Enter the server IP/host name and port
d
under the "Player settings" tab. The server IP/host name should be the PC where iSignager software
installed. The port number must match with the port number during server software installation; the
default port number is 80.
Go to "System administration" > "Network settings". Under the "TCP/IP" tab, click to configure the IP
e
address of the iS-1600.
Launch the iSignager software from server PC. Use iCommander to scan and add system.
f
Do not power off the device during the reset process. The system will got damaged if the process is interrupted.
繁體中文
系統設定
執行產品光碟，點擊「 Install iSignager Software 」並依指示安裝 iSignager 軟體。
a
開機前請先接上網路線， iS-1600 預設會自動取得 IP 位址，該 IP 位址在開機時會顯示在螢幕
b
上。若網路中沒有 DHCP 伺服器可提供 IP 位址， iS-1600 會使用預設 IP 169.254.100.100 。使用者
可用網路連接 PC 及 iS-1600 ，並使用網頁瀏覽器開啟 http://169.254.100.100/ 以進行設定。
在網頁瀏覽器中輸入 iS-1600 的 IP 位址並用預設帳號密碼登入。
c
帳號 : admin
密碼 : signage
進入「 System administration 」「 Basic configuration 」，在「 Player Settings 」頁面輸入主機
d
IP 及名稱。主機 IP 及名稱必須是安裝 iSignager 軟體的 PC 的 IP 及主機名稱。連接埠號必須跟安裝
iSignager 軟體時輸入的連接埠號相同，預設連接埠號是 80 。
進入「 System administration 」「 Network settings 」，在「 TCP/IP 」頁面點擊 以設定 iS-1600
e
的 IP 位址。
在 PC 上啟動 iSignager 軟體，使用 iCommander 掃瞄並加入 system 。
f
請勿在重置過程中關機，若因此導致重置過程被中斷，將造成系統損毀。
