GB
Handling the equipment
Before using the equipment for exercise, check carefully to en-
■
sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp
■
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
The machine is designed for use by adults and children should
■
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.
The rowing machine is a training device which works on a
■
stroke rate dependent basis (independent of speed).
A slight production of noise at the bearing of the centrifugal
■
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling
result from engineering and are absolutely safe.
The training device has a hydraulic brake system.
■
To operate correctly, the pulse function requires a minimum vol-
■
tage of 2,7 volts (only for computers working with batteries).
Before beginning your first training session, familiarize yourself
■
thoroughly with all the functions and settings of the unit.
When training intensivly shock absorbers may become very
■
List of spare parts page 36-39
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07977-900 / spare-part no. 91280039
/ 2 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date,
if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect des-
cription / damage report!
Important: spare part prices do not include fastening material if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with faste-
ning material".
hot. Please avoid contact and do not touch the shock absorbers
after training.
Care and Maintenance
Damaged components may endanger your safety or reduce
■
the lifetime of the equipment. For this reason, worn or dama-
ged parts should be replaced immediately and the equipment
taken out of use until this has been done. Use only original
KETTLER spare parts.
To ensure that the safety level is kept to the highest possible
■
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
Use for your regular cleaning, maintenance and care our ap-
■
pliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.
Please ensure that liquids or perspiration never enter the ma-
■
chine or the electronics.
A few drops of viscous oil should be applied to the bearing
■
sleeves of the hydraulic absorbers and the rowing levers. Care
should be taken that the oil does not drip onto the floor!
After a longer period of disuse, the hydraulic absorbers may
■
not achieve their best performance at once. Before beginning
exercising or after a period of disuse, it is recommended to ac-
tivate the absorbers by several pumping movements.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 591901
+44 1527 62423
e-mail:
+1 888 253 8853
+1 888 222 9333
e-mail:
5